Plataforma de Cannabis Medicinal y Cáñamo Industrial
Plataforma de Cannabis Medicinal y Cáñamo Industrial
Standard Guide for Whole Hemp Seed Storage at Primary Production Facilities
20/09/2023 -
Significance and Use 4.1 Product wastage will be reduced if spoilage is avoided or the potential for spoilage is identified earlier in the process. High moisture can result in conditions...
Standard Specification for Label Content and Style, Format, Location, and Prominence of Elements for Consumer Products Containing Cannabinoids
20/09/2023 -
Scope 1.1 This specification shall define the label content and style and format specifications for consumer products containing cannabinoids sold in an adult-use or medicinal-use...
Standard Practice for Determination of Water Activity (aw
20/09/2023 -
Significance and Use 5.1 This practice is designed for use on cannabis flower by cannabis producers, processors, dispensers, testing laboratories, and end users. aw testing at any point in...
Standard Specification for Maintaining Acceptable Water Activity (aw
20/09/2023 -
AbstractThis specification prescribes the recommended range of water activity (aw) suitable for safe and efficacious storage of cannabis flowers or portions thereof. Water activity (aw) is...
Standard Guide for Compliance to the Specifications of ASTM D8450
20/09/2023 -
Significance and Use 4.1 Standards and practices for assuring safety, quality, and weight stabilization during key steps of the cannabis/hemp flowers sojourn are in order. ...
Standard Guide for Meeting the Specifications of ASTM D8432
20/09/2023 -
Significance and Use 4.1 Standards and practices for assuring safety, quality, and weight stabilization during key steps of the cannabis/hemp flowers’ sojourn are in order. ...
Standard Guide for Meeting the Specifications of ASTM D8423
20/09/2023 -
Significance and Use 4.1 Standards and practices for assuring safety, quality, and weight stabilization during key steps of the cannabis/hemp flowers’ sojourn are in order. ...
Guía estándar para el almacenamiento de semillas de cáñamo enteras en instalaciones de producción primaria (Standard Guide for Whole Hemp Seed Storage at Primary Production Facilities)
20/03/2023 -
significado y uso
4.1 Se reducirá el desperdicio de productos si se evita el deterioro o si se identifica la posibilidad de deterioro antes en el proceso. La...
Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis
13/02/2023 -
5.1The sample preparation procedure for comminution impacts other downstream processes such as extraction and sonication, which ultimately affects the total analytical error (TAE) and measurement...
ASTM WK84667 Nueva Guía para Trabajar Cannabis Molido y Kief. (work item)
10/02/2023 -
Alcance
Esta guía estándar documentará los controles de ingeniería para la filtración del aire y la calidad del aire y el PPE (Equipo...
ASTM WK84589 Nueva especificación sobre qué es un cannabinoide intoxicante (Work Item)
10/02/2023 -
Alcance
Definición de las métricas que permiten determinar si un cannabinoide es intoxicante o...
Standard Test Method for Determination of Cannabinoids in Cannabis Raw Materials and Resin Cannabis Products by Gas Chromatography and Flame Ionization Detection
15/12/2022 -
5.1Gas chromatography and flame ionization detection provides a rapid means to identify and quantify cannabinoids in a variety of samples of interest. This test method allows producers of cannabis...
Standard Specification for Medicinal-use Cannabis Inflorescence
15/12/2022 -
1.1This standard defines the specifications (appropriate tests, their analytical methods and acceptance criteria) for the identification, strength (for example, cannabinoid content), and purity (for...
Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
30/11/2022 -
Significance and Use
5.1 The analysis and reporting of cannabinoid content in cannabis and hemp is required to address human health and safety concerns, satisfy testing and labeling...
Método de prueba estándar para la determinación de cannabinoides en materias primas y productos de resina de cannabis mediante cromatografía gaseosa y detección de ionización de llama (Standard Test Method for Determination of Cannabinoids in Cannabis Raw Materials and Resin Cannabis Products by Gas Chromatography and Flame Ionization Detection)
30/11/2022 -
Alcance
Este método de prueba cubre el análisis de cannabinoides en productos de cannabis mediante cromatografía de gases (GC) y detección de...
Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
30/11/2022 -
Significance and Use
5.1 Medical and/or recreational marijuana (cannabis) has been legalized for adult use in many countries and states within the USA (5). Many jurisdictions...
Standard Guide for Requirements for Medical-related Professionals within the Cannabis and Hemp Industries
30/11/2022 -
Significance and Use
5.1 As patient use of cannabis and hemp for medical purposes increases and medical professionals are increasingly called upon to provide medical advice, the...
Standard Practice for Cannabis or Hemp Supplier Lifecycle Management
30/11/2022 -
4.1This practice is intended to be used by cannabis or hemp operators, or both, to establish good supplier lifecycle management practices. 4.1.1Without proper oversight, the quality and...
Especificación de estándares para las inflorescencias de cannabis de uso medicinal (Standard Specification for Medicinal-use Cannabis Inflorescence)
29/11/2022 -
Este estandar define las especificaciones para la identificación, potencia (por ejemplo; contenido de cannabinoides) y pureza...
Standard Specification for Environmental Conditions while In Transit for Packaged Cannabis/Hemp Flower
18/10/2022 -
1.1This standard specifies the environmental conditions, such as temperature, humidity, and lighting under which cannabis\/hemp flowers packaged in fresh format and intended for human use are to be...
Standard Specification for Environmental Conditions for Post-packaged Storage and Retail Merchandising of Cannabis/Hemp Flower
16/10/2022 -
1.1This standard specifies the environmental conditions, such as temperature, humidity, and lighting under which cannabis\/hemp flowers in fresh format intended for human use are packaged to be...
