Tecnología Médica

Tecnología Médica

Recuperador de coágulos ajustable reduce tensión de los vasos durante el tratamiento del accidente cerebrovascular isquémico
01/08/2022 - Los stentrievers existentes diseñados para enfermedades neurovasculares tales como accidentes cerebrovasculares isquémicos y hemorrágicos carecen de capacidad de ajuste, se...
New study finds 3D printing to be more accurate than milling in the creation of dental crowns 
27/07/2022 - In a recent study, the dentists 3D printed and wet-milled crowns from the same dataset, before superimposing their intended design over resulting models. Through several testing cycles, the team...
3D printed cornea transplants at Precise Bio gain new R&D funding from Carl Zeiss Meditec
27/07/2022 - Precise Bio is currently honing endothelial keratoplasty and natural lenticule transplants, designed for treating those patients that suffer from eye conditions like keratoconus and require vision...
Scientists’ ‘3D cryoprinting’ technology enables creation of cell scaffolds with tissue-regenerating potential
26/07/2022 - Unlike ordinarily-bioprinted tissues, which can be too soft to support their own weight, the team’s technology sees bio-inks frozen and cross-linked, facilitating the creation of cell...
3D printed MyBone maxillofacial graft approved for patient use in Europe
08/07/2022 - MyBone is reportedly the first commercially available 3D printed bone graft authorized under the Medical Device Regulation 2017/745, and has also been ISO 13485 certified. As a result, the...
Implantes ortopédicos inteligentes ayudan a la curación y reparación de huesos lesionados
07/07/2022 - Al tratar huesos fracturados, los médicos generalmente usan implantes estándar. Se atornilla una placa en el hueso para estabilizar la fractura, independientemente de si el hueso...
Dispositivo implantable soluble puede controlar el dolor posoperatorio sin medicamentos
06/07/2022 - Los investigadores han desarrollado un implante pequeño, suave y flexible que alivia el dolor a demanda sin el uso de medicamentos. El dispositivo, primero en su tipo, podría...
Amnovis and BAAT Medical join forces to develop 3D printed medical device workflow
16/06/2022 - Pooling their expertise, the two companies are developing a complete process spanning initial design to manufacturing and validating end-use devices which will enable medical device start-ups and...
3D printed implants enable facial deformity surgery success
14/06/2022 - Doctors in Dubai have successfully completed a series of surgeries on a young male patient to reform his facial deformities using 3D printed titanium implants.  Claimed as a one-of-its-kind case...
United Therapeutics and 3D Systems shoot for 3D printed lung scaffold trials within five years
08/06/2022 - The partners have produced a 3D printed human lung scaffold capable of demonstrating gas exchange in animal models, and are now planning to cellularize the scaffold with a patient’s own stem...
3DBio conducts successful human ear reconstruction with 3D bioprinted AuriNovo implant
07/06/2022 - The first-in-human Phase 1/2a clinical trial evaluated the safety and efficacy of AuriNovo for patients with microtia, a rare congenital deformity where one or both outer ears are absent or...
Marcapasos inalámbrico completamente implantable habla con el paciente y se disuelve después de su uso
03/06/2022 - Durante casi dos décadas, un equipo de investigadores ha estado desarrollando dispositivos portátiles, inalámbricos, suaves y flexibles y tecnologías...
Stent inteligente, inalámbrico y sin batería.
20/05/2022 - En el Centro Médico Nacional “20 de Noviembre” del ISSSTE se realizan cerca de 1,500 estudios de angiografía coronaria al año, de éstos,...
New study assesses effectiveness of 3D printed titanium implants on bone growth
11/05/2022 - A total of 16 patients were observed during the study, each undergoing reconstructive surgery for various maxillofacial defects. The patients were fitted with customized titanium implants and...
Recubrimiento biotecnológico antimicrobiano para dispositivos médicos e implantes.
26/04/2022 - Una nueva tecnología de recubrimiento para dispositivos médicos que representa un cambio de paradigma en la prevención de infecciones y la protección contra una amplia...
Boston University’s new 3D printed mini human heart beats on its own
26/04/2022 - Named the cardiac miniaturized Precision-enabled Unidirectional Microfluidic Pump, aka the miniPUMP, the device was created using a combination of stem cell-derived human heart cells and...
Marcapasos inteligente.
21/04/2022 - Un marcapasos se implanta para ayudar a controlar los latidos cardíacos. El médico puede recomendarte un marcapasos temporal cuando tienes latidos cardíacos...
IA identifica pacientes con paro cardíaco que pueden beneficiarse del desfibrilador automático implantable
06/04/2022 - Para los afectados, el 90 % morirá dentro de los 10 minutos posteriores al paro cardíaco. Para esta condición en gran parte fatal, la prevención tendría un...
CollPlant to trial 3D bioprinted breast implants in breakthrough animal study
01/04/2022 - Alongside the release of its FY 2021 results, which show that it generated $15.6 million in revenue, 155.7% more than the $6.1 million it reported in FY 2020, CollPlant announced that its...
Lentes de contacto inteligentes para control de diabetes.
31/03/2022 - De acuerdo con la International Diabetes Federation (IDF), se estima que 14 millones de adultos en México viven con diabetes, un aumento del 10% en los últimos dos...
Israeli surgeons carry out “world’s thinnest 3D printed cornea” transplant
25/03/2022 - Developed by medical device manufacturer EyeYon, the implant itself was just 50 microns thick and 3D printed from synthetic materials, to ensure that it wouldn’t be rejected by its human...